 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PC Card Socket Connector Complies with PC card Standard IC1 Series sFeatures 1. Compliant with PC Card Standards Polarized entry prevents wrong insertion into a corresponding connector. And sequential contact engagement prevents electorostatic discharge,avoiding possible damage to sensitive board circuits. 2. Suited to Automatic Mounting Packaged for a board placement with aoutmated equipment. 3. Lead Offset Available with several board termination levels,to allow use of different height board components. In relation to the center line of connector,0.2mm,+0.3mm,+0.55mm,+0.9mm and terminations on board center are available. -55c to +85c (Note 1) 95% R.H. max. (No condensation) Specification 1000M ohms min. No flashover or insulation breakdown. 40 m ohms max. (initial value) (Note 3) No electrical discontinuity of 100ns or more 500 V DC 500 V AC / 1 minute 1 mA Frequency: 10 to 2000 Hz, single amplitude of 1.52 mm or acceleration of 147 m/s2(peak), 4 hours in each of the 3 directions. 96 hours at temperature of 40c and humidity of 90% to 95% -55c, 30 min /15 to 30c, within 5 min/85c, 30 min /15 to 35c, within 5 min, for 5 cycles 10000 cycles at 400 to 600 cycles per hour Reflow: At the recommended temperature profile Manual soldering: 300c for 3 seconds Storage temperature Storage humidity Conditions -40c to +70c (Note 2) 40% to 70% (Note 2) sProduct Specifications Current rating 0.5 A Ratings Voltage rating 125 V AC Item 1. Insulation resistance 2. Withstanding voltage 3. Contact resistance 4. Vibration Operating temperature Operating humidity 5. Humidity (Steady state) Insulation resistance: 100 M ohms min. 6. Temperature cycle 7. Durability (Insertion/withdrawal) 8. Resistance to soldering heat No damage, cracks, or parts looseness. Change of contact resistance from the start should be 20 m ohms max. No deformation of components affecting performance. Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation. sMaterials Part Insulator Contact Material PPS IC1K,IC1HA:Phosphor bronze Others:Beryllium copper Finish Color : Black Contact Area : gold plating Lead Area : solder plating Remarks UL94V-0 ----------------- A52 sOrdering Information IC1 F - * R D - 1.27 SH 1 1 2 2 3 4 5 6 7 Series name : IC1 BB: Compliant with PC Card Standards F: Compliant with PC Card Standards Lead offset type K: 3 4 5 6 7 Compliant with PC Card Standards Connector thickness: 2.7mm Suited to automatic mounting Contacts: 40, 68 R: Card Connector D: 2-row arrangement Contact pitch: 1.27mm Mounting method SH: Two sided board terminations SHA: Two sided board terminations SF: Single surface mount type. SFA: Single surface mount type. SFB: Single surface mount type. HA: Compliant with PC Card Standards Connector thickness: 2.8mm Connector thickness: 2.7mm Connector thickness: 2.7mm s68 Contacts Card Connectors qConnector thickness : 2.7mm qLead offset type qSuited to automatic mounting qSingle surface mount type IC1K-68RD-1.27SFA CL640-0047-2 BPCB mounting pattern Unit:mm Part Number IC1K-68RD-1.27SF IC1K-68RD-1.27SFA IC1K-68RD-1.27SFB CL No. 640-0046-0 640-0047-2 640-0048-5 A 2 2 3 B 0.3 0.9 ------C 5 5 6 A53 s68 Contacts Connector qConnector thickness:2.7mm qSingle surface mount type Compliant with PC Card Standard IC1F-68RD-1.27SF CL640-0035-3 Unit:mm Part Number IC1F-68RD-1.27SF IC1F-68RD-1.27SFA CL No. A 640-0035-3 0.3 640-0040-3 0.854 s68 Contacts Connector qConnector thickness:2.7mm qTwo sided board termination on the center line Compliant with PC Card Standard IC1F-68RD-1.27SH CL640-0013-0 * Recommended board thickness : 0.4 to 0.5mm A54 s68 Contacts Connector qConnector thickness:2.8mm qTwo sided board termination on the center line Compliant with PC Card Standard IC1BB-68RD-1.27SH CL640-0036-6 * Recommended board thickness : 0.4 to 0.5mm s68 Contacts Connector qConnector thickness:2.7mm qTwo sided board terminations qTwo Mounting levels of board terminations Compliant with PC Card Standard IC1HA-68RD-1.27SH CL640-0044-4 * Recommended board thickness : 0.4 to 0.5mm 1 For 0.45mm board thickness Part Number IC1HA-68RD-1.27SH CL No. 640-0044-4 IC1HA-68RD-1.27SHA 640-0045-7 A55 |
Price & Availability of IC1HA-68RD-127SHA
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |